
Add to Cart
wind power inverters with different specifications, and they have shown an excellent performance in its functions and handling ability.
Wind power grid tid inverter could convert unstable fluctuating AC current from wind turbine to AC current with stable voltage and frequency ,and then input AC current into grid ,at the same time ,if the wind power controller outputs DC current ,the grid tie inverter could also accept converting DC current output .Inverter contain an integrated isolation transformer , therefore ,It is possible to connect any quantity of inverters using parallel connection to make it work appropriately with the wind turbine's maximum power
Item No. | TGWI-3K |
Input parameters | |
Range of Input Voltage (DC) | 60V-550V |
Maximum Power from Turbine | 3600W |
DC Voltage VPP | VPP < 10 % |
Output parameters | |
Rated Power | 3000W |
Range of Grid Voltage | Choice of 220, 230 or 240V AC |
Range of Grid Frequency | Choice of either 50Hz or 60Hz |
Power Factor | > 0.99 |
Maximum Efficiency | 94% |
Standby Consumption | < 11 W |
Protections | Anti-islanding, Over Temperature, Over Load, Over Current, Over Voltage |
Total Harmonic Distortion (THD) | < 4 % |
Physical feature | |
Dimensions W×H×D in mm | 480/680/235 |
Net Weight | 56KGS |
Gross Weight | 80KGS |
Protection Level | IP65 |
Installation Method | Wall-mounted |
Ambient Temperature | -20 ~+40 Celsius © |
Storage Temperature | -20 ~+50 Celsius ©- |
Inverter feature | |
Cooling Concept | Cooling Fan |
Display | LCD & Signal Lamps |
Communication | RS485 |
Points of power curve | Minimum 5, Maximum 20. |
EMC | EN61000-6-1:2007 |
EN61000-6-3:2007 | |
Safety Standard | IEC 62103:2003(1st Edition) |
EN50178:1997 |